Regroover

It is made of advanced microcomputer control system adopts anti-impact corrosion of metal materials, low power consumption.

(1)Technical Parameter:

Name: carved machine

Model:HSD-U100

Voltage:220V

Power:50W

Current Output:120A

Heating:Impluse

Specification for the host :180mm×110mm×115mm

Specification for the hand grip:230×120mm

Weight:8KGS

(2).Operation:

Pls read the instruction before operate the machine

Note: Pls check the package ,and examine the electric

1,On the basis of installing the blade , loose the screw on the front-end of the hand grip, then insert the blade , and direction for the cut of the blade is forward, pls see the figure

2. On the basis of regulating the depth and width ,use the caliper to lock the screws on the front-end of the hand grip

3.The specification for the power switch of the host and the knob , the speed of the heating depend on the knob , there is no voltage when on 0 , the machine works when the two switches are both on at the same time .

4.Before connecting the electrical ,pls examine the electric interface to confirm if it is accordance with the machine

5.There has a auto-pushed rubber switch inside the knob ,push to heat before the operation

6.When carved and grooved ，pls pushed two seconds first directed at the carved position before push forward.

(3).Attention:

Pls check if the voltage is accordance with the required voltage before using

The carved machine is supplied with a grounding wire ,pls use the three hole outlet with the grounding wire , connect grounding well to ensure safe.

Pls ensure there dosen’t have the inflammable and explosive material nearby the machine.

Don’t forget turn off the electric when have break or finish the work

Don’t change and dismantle the machine

The machine should be keep dry , don’t use the machine when get wet in the rain or on the wet.

The user should put on the heat protective gloves when the machine works .And pay attention not to let something else touch the heating elements .

Don’t knock arbitrarily ,dismantle and install the heating elements after connect the electric .

If there has anything wrong with the machine , pls ask the maintenance personnel with the profeesional skill  for help or send back to our company for examining and  repairing .

6.After-sales serivce:

For the machine is one year warranty, life-long maintenance

Regroover